Item No.: RS-HC
Air Cooled Water Chiller/ Cold and Hot Temperature Controller OEM
Description of the Heat and Cold Chillers 2-in-1 ,
The Heat and Cold Chillers 2-in-1 use a single closed-loop design for pressurized refrigerant. All
models are equipped with compressor and motor overload protection,
phase shortage and reversal alarms, anti-freeze thermostat,
pressure gauges, etc. They feature excellent performance and a long
lifespan. The series of working flow is based on the basic
principle of heat exchange. It is applicable to the industry that
requires flow of precisely controlled chilled water, and considered
as indispensable equipment for modern industry.
Features of the Heat and Cold Chillers 2-in-1 ,
1. Easily to shift quickly from cooling and heating process with
one-press operation based on production needs/temperature control
2. 1nstalled with brand new famous brand compressor from USA and
Japan with safety protection inside, which makes low noise and
provides for stable durabilty.
3. Electric parts are adopted with original world-class brand
4. High efficient evaporator and condenser could save energy
consumption more than 30%.
With sufficient protections, intelligent fault indication and
buzzer alarm, which is high automatized and requires no dedicated
5. Nominal cooling capacity calculated according to: Inlet/outlet
chilled fluid temperature:12 ℃/7℃. Inlet/outlet cooling water
6. Working condition: The temperature range of chilled fluid is
from 5°c to 35°C Temperature difference between inlet and outlet
chilled fluid is 3℃ to 8℃.
It is better to run the chiller while the ambient temperature at or
below 35>c We reserve the right to modify the above information
without prior notice.
Working Principle of the Heat and Cold Chillers 2-in-1 ,
Specification of the Heat and Cold Chillers 2-in-1 ,
1 ) Refrigeration capacity is tested under the condition that cold
water outlet temperature is at 12℃ and ambient temperature is at
2) This pump is used as standard either for domestic of Southeast
Asia; medium (Model denotes “P” ,such as TIC-5W-P) or high pressure
pump(Model denotes” HP” .such as TIC-5W-HP) are optional for
installation on customer’ s demands.
Demands on special voltage of power supply could be satisfied.
Outline drawing of the Heat and Cold Chillers 2-in-1 ,
Machine color--- blue or grey white, or others;
Machine brand--- factory brand, OEM brand or no brand;
We do OEM!
We do B2B, B2C!
For more choice, please click the following,
water-cooled water chiller;
central chiller/open type chiller/screw chillers;
water cooling tower;
mold temperature controller;